[JOB#1414]
CLERK NAME PROGRAMMING
YY: Clerk code = 1
∼ 99
Characters can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys
is as follows:
XXX
→ 00 KEY XXX: Character code (3 digits)
Please refer to section 4.
Max. 8 characters
MRS = No record (It is set all space when a clerk file is created.)
[JOB#1500]
CASHIER CODE DEFINITION
XX: Cashier No.= 1
∼ 99
YY: Cashier code = 00
∼ 99
MRS = 01;1, 02;2, 03;3, 04;4
(Some code as cashier No.)
[JOB#1514]
CASHIER NAME PROGRAMMING
YY: Cashier code = 01
∼ 99
Characters can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys
is as follows:
XXX
→ 00 KEY XXX: Character code (3 digits)
Please refer to section 4.
Max. 8 characters
MRS = ’Space’
[JOB#2510]
CASHIER PROGRAMMING
YY: Cashier code = 01~99
A: G.C. copy A
Enable 0
Disable 1
B: VAT shift B
Not 0
State 1
C, D: Not used (Fixed at "00")
E: Drawer No. H
Not open 0
Drawer No. 1~2
MRS = 00001
[JOB#2610]
DATE SETTING
XXYYZZ: Date (Year-Month-Day/Day-Month-Year/Month-Day-Year)
The date entry format complies with the applicable SRV-mode
programming.
MRS = 010100
[JOB#2611]
TIME SETTING
XX: Hour (00
∼ 23)
YY: Minute (00
∼ 59)
MRS = 0
[JOB#2612]
MACHINE NUMBER SETTING
XXXXXX: Machine number (0
∼ 999999)
MRS = 0
[JOB#2613]
CONSECUTIVE NUMBER SETTING
XXXX: Consecutive number (0000
∼ 9999)
MRS = 0000
1414 YY Character key
All space
ST TL
1500 XX YY
No change
ST TL
1514 YY Character key
TLST
All space
2510 YY ABCDE
No change
ST TL
2610
XXYYZZ
TL
0
2611 XXYY
TL
0
2612
XXXXXX
TL
0
2613 @/FOR CA/ATXXXX
2 – 15
To Next Page
Loading...
