Operations
To activate setting mode, hold down PROGRAM, TEMP., RINSE simultaneously for 3
seconds when the washing machine is turned on.Setting Mode can be activated before
program is started.
Setting mode Setting button Contents
Water level RINSE
"0" or "1" is toggled on display by pressing
RINSE.
0: standard water level (default)
1: water added than standard level
Available programs: COTTON
Reset the setting to factory setting by pressing
DELAY.
Factory reset DELAY
Setting mode
Mute
In the standby state, press and hold TEMP. for 3 seconds to turn on and off the
mute function.
When this icon is on, the machine will not output sound, except for error sounds.
Child lock
Press and hold RINSE for 3 seconds, the child lock function will be turned on or off, and
the child lock indicator will turn on or off.
This function can lock all the buttons except the Power button and the child lock button.
Child lock can not be turned on when 0:00 is blinking on Display after program
operation ended.
NOTE
• Once the child lock function is turned on, this setting is memorized even after the
washing machine is turned off. When the washing machine is turned on again, the
program will resume from where it has been stopped.To operate other buttons
except Power, turn off the child lock repeating procedure explained above.
23
To Next Page
Loading...
