Sharp GF-7500H

INFORMATION
OF
LEADLESS
TYPE
RESISTORS,
CAPACITORS
&
JUMPERS
EXPLANATORY NOTES OF CHIP RESISTORS, CHIP CAPA- 3. Identification of the tubular-shaped chip jumper
CITORS AND CHIP JUMPERS IN TUBULAR SHAPE. This jumper has no color band indication on it: no
resistance
is
given
for
any
jumper
of
this
type.
If the ground color is ivory, this means a tubular-shaped
- Tubular-shaped
ROD ANTENNA
chip resistor chip jumper.
¢ Tubular-shaped
chip capacitor Note:
* Tubular -shaped The ist color band is thicker than the 2nd and/or 3rd color
chip jumper band.
L7 BAR ANTENNA
There is no indication about the resistance tolerance and the
Capacitance tolerance. But the tubular-shaped chip resitor is
Appearance specified to have the tolerance J (+5%).
5 hy
®OOO tw
sess Sh
fee coome DIFFERENCES OF TUBULAR-SHAPED CHIPS AGAINST
C:1.0+05mm THE ORDINARY TYPES OF RESISTORS, CAPACITORS
D1: 2.2+0.1mm AND JUMPERS.
D2: 2.4mm(max)
acl
perpaanre
Oily
Tubular-shaped
chip
resistor
sw
BAND
SELECTOR
Table
22-1
Ordinary
resistor
Tubular-shaped
chip
VRD-ST2EE ---J VRD-MF2EE ---J
IDENTIFICATION OF TUBULAR-SHAPED = CHIP
RESISTORS, TUBULAR-SHAPED CHIP CAPACITORS i
AND TUBULAR-SHAPED CHIP JUMPERS. Appearance Electrode
oe ie
Color code
Lead Color code
Shaped Chip Capacitor
Appearance of Tubular-Shaped Chip Resistor and/or Tubular- | NY
Attach-
ment on
PWB
PWB Adhesive
Ground color 3rd color band (Multiplier)
2nd color band (Resistance
or Capacitance)
1st color band (Resistance
or Capacitance)
Symbol on
ea eolerband 2nd color band 2nd color band band} 3rd color band diagram
olor
ee eee! Table 22-3
ee eet
a as
} 6 |
Tubular-shaped chip capacitor
Ordinary capacitor Tubular-shaped chip
No VCKYATI1HB---K VCKYMF1HB---K
Appearance
—_—-
Seong
Electrode
Table
22—2
Color
Codes
of
Tubular-Shaped
Chip
Resistors
Lead
Color
code
Goletcode
and
Tubular-Shaped
Chip
Capacitors
Attach-
PWB_
Adhesive
ment on
PWB
1. Identification of the tubular-shaped chip resistor
If the ground color is ivory, this means a tubular-shaped
chip resistor.
BATTERIES
eS
ne
BE
Ae
ch
2.
Identification
of
the
tubular-shaped
chip
capacitor
Symbol
on
ae
Tautou
]
If
the
ground
color
is
green,
this
means
a
tubular-shaped
wiring
chip
capacitor.
It
is
pink
for
the
semiconductor
chip
diagram
capacitor
(VCTYMEF
-
-
-
562K),
however
From
MAIN
P.W.B.
;
Table
22—4
cnsio2
Figure
21
WIRING
SIDE
OF
TUNER
AND
POWER
SUPPLY
P.W.
BOARD
—21-
—22—