EasyManua.ls Logo

Sharp HT-DV40H - Specifications

Sharp HT-DV40H
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HT-DV40H
1 – 2
[3]
Specifications
HT-DV40H except Australia
Main Unit USB
USB host
interface
Complies with USB 1.1/2.0 (Full Speed)
Mass-Storage-Class.
Support Bulk only and CBI protocol.
Support file MPEG 1 Layer 3
MPEG 2 Layer 3
WMA (Non DRM)
Bitrate support MP3 (32 - 320 kbps)
WMA (64 - 160 kbps)
Other Maximum total number of MP3/WMA files is
1200.
The ID3TAG information supported are
TITLE, ARTIST and ALBUM only.
Support ID3TAG version 1 and version 2.
File system
support
Support USB devices with Microsoft
Windows/DOS/FAT 12/FAT 16/FAT 32.
2 kbyte block length for sector.
DVD player
Speaker
Subwoofer
Signal system PAL/NTSC colour
Supported disc
types
DVD (with the same region number on the
back of the unit), audio CD, CD-R, CD-RW,
JPEG, DivX (version 3.0 ~ 6.0)
Video signal Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio signal Frequency
characteristics
Linear PCM DVD:
20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
S/N radio CD: 94 dB (1 kHz)
Dynamic range Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic
distortion ratio
0.01% maximum
Type 2-way type speaker system
2.5 cm (1") tweeter
8 cm (3-1/8") woofer (x 2)
Maximum input
power
150 W
Rated input power 75 W
Impedance 4 ohms
Dimensions Width: 300 mm (11-13/16")
Height: 129 mm (5-1/16")
Depth: 160 mm (6-5/16")
Weight 2.1 kg (4.6 lbs.)/each
Type Subwoofer system
20 cm (8 ") subwoofer
Maximum input
power
200 W
Rated input power 100 W
Impedance 12 ohms
Dimensions Width: 220 mm (8-11/16")
Height: 354 mm (13-15/16")
Depth: 438 mm (17-1/4")
Weight 7.6 kg (16.7 lbs.)
Tuner
Frequency
range
FM: 87.5 - 108 MHz
Other Maximum station can be stored is 30 preset.
(*) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Power source AC 220 - 240 V ~ 50 Hz
Power
consumption
Power on: 82 W
Power stand-by: 0.6 W (*)
Output power
Front Speaker:
MPO: 150 W (75 W + 75 W) (10% T.H.D.)
RMS: 150 W (75 W + 75 W) (10% T.H.D.)
RMS: 90 W (45 W + 45 W) (0.9% T.H.D.)
Subwoofer:
MPO: 100 W (10% T.H.D.)
RMS: 100 W (10% T.H.D.)
RMS: 55 W (0.9% T.H.D.)
Video output
terminals
SCART output: SCART terminal x 1
Video output: RCA type x 1
S-video output: S-terminal x 1
Component video output: (Y/P
B
/P
R
) x 1
HDMI output : HDMI x 1
Support 480p/570p/1080i output formats.
Audio input
terminals
Optical digital input (DIGITAL 1): Square type x 1
Optical digital input (DIGITAL 2): Square type x 1
Analogue input : 500 mV/47k ohms
Audio output
terminals
Speakers: 4 ohms
Subwoofer: 12 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Dimensions Width: 300 mm (11-13/16")
Height: 106 mm (4-1/8")
Depth: 300 mm (11-13/16")
Weight 3.8 kg (8.4 lbs.)

Other manuals for Sharp HT-DV40H

Related product manuals