Sharp HT-M700H - Page 76

HT-M700H
8 – 8
U7 VHiDDX8001/-1: DSP (DDX8001) (1/2)
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
Pin No. Terminal Name Input/Output Function
1 MVO/DSD_CLK Input Master Volume Override/ DSD Input Clock.
2 GND – Ground.
3 VDD3 Input 3.3V Supply.
4 GND – Ground.
5* N.C. – No Connect.
6 SDI_78/DSD_6 Input Input Serial Data Channels 7 <FmSdata>[amp ] 8/DSD Input Channel 6.
7 SDI_56/DSD_5 Input Input Serial Data Channels 5 <FmSdata>[amp ] 6/DSD Input Channel 5.
8 SDI_34/DSD_4 Input Input Serial Data Channels 3 <FmSdata>[amp ] 4/DSD Input Channel 4.
9 SDI_12/DSD_3 Input Input Serial Data Channels 1 <FmSdata>[amp ] 2/DSD Input Channel 3.
10 LRCKI/DSD_2 Input Input Left/Right Clock/ DSD Input Channel 2.
11 BICKI/DSD_1 Input Input Serial Clock/ DSD Input Channel 1.
12 VDD3 Input 3.3V Supply.
13 GND – Ground.
14* N.C. – No Connect.
15 RESET Input Global Reset.
16 PLL_BYPASS Input Bypass Phase Locked Loop.
17 SA Input
Select Address (I
2
C).
18 SDA Input/Output
I
2
C Serial Data.
19 SCL Input
I
2
C Serial Clock.
20 XTI Input Clock Input.
21 FILTER_PLL Input PLL Filter.
22* N.C. – No Connect.
23 GNDA – PLL Ground.
24 VDDA Input PLL Supply.
25 CKOUT Output Clock Output.
26* N.C. – No Connect.
27 GND – Ground.
28 VDD3 Input 3.3V Supply.
29 OUT8B Output PWM Channel 8 Output B.
30 OUT8A Output PWM Channel 8 Output A.
31 OUT7B Output PWM Channel 7 Output B.
32 OUT7A Output PWM Channel 7 Output A.
33 OUT6B Output PWM Channel 6 Output B.
34 OUT6A Output PWM Channel 6 Output A.
35 VDD3 Input 3.3V Supply.
36 GND – Ground.
37* N.C. – No Connect.
38 OUT5B Output PWM Channel 5 Output B.
39 OUT5A Output PWM Channel 5 Output A.
40 OUT4B Output PWM Channel 4 Output B.
41 OUT4A Output PWM Channel 4 Output A.
42 OUT3B Output PWM Channel 3 Output B.
43 OUT3A Output PWM Channel 3 Output A.
44 VDD3 Input 3.3V Supply.
45 GND – Ground.
46* N.C. – No Connect.
47 OUT2B Output PWM Channel 2 Output B.
48 OUT2A Output PWM Channel 2 Output A.
49 OUT1B Output PWM Channel 1 Output B.
50 OUT1A Output PWM Channel 1 Output A.
51 EAPD Output Ext. Amp Power Down.
52 VDD3 Input 3.3V Supply.
53 GND – Ground.
54* N.C. – No Connect.
55 BICKO Output Output Serial Clock.
56 LRCKO Output Output Left/Right Clock.
57 SDO_12 Output Output Serial Data Channels 12.
58 SDO_34 Output Output Serial Data Channels 34.
59 VDD3 Input 3.3V Supply.
60 GND – Ground.