E-15
HT-SB200
2008 December 17
HT-SB200_EN-UK_rev4.fm
ENGLISH
References
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
z Do not use chemicals for cleaning (petrol, paint thinner, etc.).
It may damage the cabinet finish.
z Do not apply oil to the inside of each component. It may
cause malfunctions.
Error indicators and warnings
When you fail to perform operations properly, the following
messages are displayed on the speaker.
(*): Should the same message appear even if the speaker is
unplugged and plugged in or is set to the stand-by mode and
on again, contact your local dealer where you purchased the
speaker.
Display Meaning
z Malfunction of the surround
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
Power indicator (blinks red)
z When the protection circuit of the
amplifier is activated.
or
or
To Next Page
Loading...
Need help?
General
