E-16
HT-SB200
2008 December 17
HT-SB200_EN-UK_rev4.fm
ENGLISH
EN (9)
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
General
(*) This power consumption value is obtained when in the
power stand-by mode.
Power source DC IN 12V 4A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption
Power on: 10 W
Power stand-by: 0.6 W (*)
Output power Front speaker:
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Subwoofer:
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
Speaker 2.1-way Speaker System
Front Speakers: 38 mm (1-1/2") Full Range
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Audio output
terminals
Speakers: 12 ohms / Channel
Subwoofer: 3 ohms
(12 Ohms x 4 parallel connections)
Input terminals Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Dimensions Width: 800 mm (31-1/2")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 1.75 kg (3.86 lbs.)
References
To Next Page
Loading...
Need help?
General
