Sharp HT-SB300

DE (1)
FR (2)
ES (3)
SV (4)
IT (5)
NL (6)
PT (7)
ZH (8)
EN (9)
AR (10)
E-8
HT-SB300
2009 February 10
HT-SB300_A6_EN_UK.fm
ENGLISH
Preparation for Use
Note:
Make sure all screws are fully tighten. (screws are not supplied)
 Installing the speaker
4 Screw the wall mount angle to the wall as shown in the
illustration. (Total screw is 8 pieces)
Wall surface
Wall mount angle
Wall mount angle
Wall surface
Wall surface
Wall mount angle
(screws x 4)
(screws x 4)
1 Align the wall mount slot at the speaker to the wall
mount angle.
2 Slot the speaker into the wall mount angle.
3 Fix them securely.
Wall surface