Sharp HT-SBW800 User Manual

8
1200mm 105mm
75mm
240mm 240mm
415mm
4,3kg
KG
5,8kg
KG
• Some 4K HDR TVs require the HDMI input or picture settings to be set for
HDR content reception. For further setup details on HDR display, please
refer to the instruction manual of your TV.
I can’t  nd the Bluetooth name of this unit on my Bluetooth device for
Bluetooth pairing
• Ensure the Bluetooth function is activated on your Bluetooth device.
• Ensure you have paired the unit with your Bluetooth device.
This is a 15 mins power o function(ERPII standard requirement for
saving power).
• When the unit's external input signal level is too low, the unit will be
turned o automatically in 15 minutes. Please increase the volume level
of your external device.
The subwoofer is idle or the indicator of subwoofer does not light up.
• Please unplug power cord from the mains sockect, and plug it in again
after 4 minutes to resent the subwoofer.
Technical speci cation
Model HT-SBW800
Soundbar
Power Supply
DC 23,0V
⎓ 3A
Power Consumption 35 W
Power Consumption StandBy <0,5W
Output Power 6 x 25W (8) + 50W (4) (RMS)
Frequency Response 120Hz - 20KHz
Subwoofer
Power Supply AC 220-240V ~ 50/60Hz
Power Consumption 35 W
Power Consumption StandBy <0,5W
Output Power 180 W (3) (RMS)
Frequency Response 40Hz - 120Hz
Bluetooth
Version V 4.2
Maximum power transmitted 5 dbm
Frequency bands 2402 MHz ~ 2480 MHz
Remote Control
Battery Type AAA (1,5V X 2)
Power Adapter
Manufacturer: Zhong Shan City Richsound Electronic Industrial Ltd.
Model name: RAD2304
Input: AC 220-240V ~ 50/60Hz 3,5A Max
Output:
DC 23,0V
⎓ 3A

Sharp HT-SBW800 Specifications

General

Brand	Sharp
Model	HT-SBW800
Category	Home Theater System
Language	English