Sharp IM-DR420H

E-7
IM-DR420H
ENGLISH
03/7/21 IM-DR420H_SEEG_E.fmIM-DR420H TINSZ0964AWZZ
Power Source
-Using with the Rechargeable Battery-
Using with the Rechargeable Battery
!
Charging the rechargeable battery
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
"
After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
"
When the portable MD is turned on or operating, the
battery will not be charged.
"
For information about the battery life, see the battery
item in the "Specifications" on page 54.
3
1
4
2
AC 110 - 240V,
50/60 Hz
To the DC IN 3V socket
1
Insert the rechargeable battery according to the
direction indicated in the battery compartment.
A rechargeable battery other than the one supplied
or the optional one AD-N70BT cannot be charged.
2
Plug the AC adaptor into the wall socket, and
then insert the plug on the other end into the DC
IN 3V socket.
3
Press the CHARGE button.
The battery indicator will scroll, and battery will begin
charging.
Scrolling