Sharp IM-DR420H

E-26
IM-DR420H
ENGLISH
03/7/21 IM-DR420H_SEEG_E.fmIM-DR420H TINSZ0964AWZZ
Useful Features
-Recording from a Microphone-
Recording from a Microphone
1
Connect a stereo microphone to the MIC IN socket.
2
Insert a recordable MiniDisc (page 10).
3
Press the REC button.
4
Press the MENU/ENTER button.
To the MIC IN
socket
( )
PLUG IN
POWER
Stereo
microphone
(commercially
available)
5
Press the or button repeatedly to select "Mic
Level".
6
Press the MENU/ENTER button.
7
Press the or button repeatedly to select "Au-
to-Hi", "Auto-Lo" or "MANUAL".
"
When "Auto-Hi" or "Auto-Lo" is selected, the record-
ing level is automatically adjusted according to
changes in sound volume. Normally select "Auto-Hi".
When the recording level frequently reaches
"OVER", switch to "Auto-Lo" to lower the level. Set
the maximum level between "-4 dB" and "0 dB".
"
The automatic level adjustment may be delayed by a
few seconds where source sounds show sudden and
rapid changes (especially in meetings and conversa-
tions). In this case adjust the recording level manual-
ly (see page 27).
8
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds even
if the MENU/ENTER button is not pressed.
9
Select the recording mode (steps 1 - 5, page 21).
10
Press the button.
Recording will start.