Sharp IM-DR420H

E-16
IM-DR420H
ENGLISH
03/7/21 IM-DR420H_SEEG_E.fmIM-DR420H TINSZ0964AWZZ
Basic Operation
-Recording-
Notes:
"
Complete the operation within 7 seconds whilst selecting
the menus.
"
Changing the volume level whilst recording does not affect
the recording.
"
You cannot adjust the bass level whilst recording.
"
Whilst "TOC" is displayed, the MiniDisc recorded contents
are not yet updated.
To interrupt recording
Press the button.
"
To resume recording, press the button again.
"
The track number will be increased by one each time the
recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
When recording is stopped, TOC is written on the MD. The
"TOC" indicator disappears.
5
Press the MENU/ENTER button.
6
Press the or button repeatedly to select "REC
MODE".
7
Press the MENU/ENTER button.
8
Press the or button repeatedly to select the
recording mode (page 21).
9
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds even
if the MENU/ENTER button is not pressed.
10
Press the button to start the MiniDisc unit re-
cording.
11
Begin playback on the stereo system, the output
will be recorded.
SP
(2 times long recording)
(4 times long recording)
(Monaural recording)
(Stereo recording)
TOC display