Sharp IM-DR420H

E-32
IM-DR420H
ENGLISH
03/7/21 IM-DR420H_SEEG_E.fmIM-DR420H TINSZ0964AWZZ
Useful Features
-Checking Displays-
!
To display the playing time of an individual
track
!
Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
"
When the battery level is very low, the battery indicator
will flash. Recharge the battery or replace the alkaline
battery with a new one.
"
When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
"
If you use the battery which you stopped charging
halfway, " " may appear. It does not mean that the
battery is completely charged.
"
The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
"
When the AC adaptor is used, the battery indicator will
not be shown.
"
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
1
Whilst in the stop mode, press the or but-
ton to display the track number and track name.
Track number
Track name
2
Press the MENU/ENTER button.
3
Press the or button repeatedly to select
"DISPLAY".
4
Press the MENU/ENTER button.
5
Press the or button to select the playing
time.
Playing time
6
Press the MENU/ENTER button.
How to read the battery indicator
When the battery
level is high
When the battery
level is very low