EN - 27
9. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your tumble dryer is equipped with a built-in fault detection system, indicated by a
combination of ashing operation lights. The most common failure codes are shown below.
ERROR CODE SOLUTION
E03 /
Empty the water tank, if problem does not solved, contact
the nearest authorised service agent.
E04 Contact the nearest authorised service agent.
E05 Contact the nearest authorised service agent.
E06 Contact the nearest authorised service agent.
E08
There may be voltage fluctuation in mains.Wait until
voltage is appropriate for working range.
E0
7 Contact the nearest authorised service agent.
E0
0 Contact the nearest authorised service agent.
To Next Page
Loading...
