EasyManua.ls Logo

Sharp KD-NCB8S7PS91-EN - User Manual

Sharp KD-NCB8S7PS91-EN
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
EN
KD-NCB8S7PS91-EN
KD-NCB8S7PB91-EN
KD-NCB8S7PW91-EN
Tumble Dryer
Home Appliances

Questions and Answers

  • J
    Jessica WilliamsAug 17, 2025
    What to do if my Sharp KD-NCB8S7PS91-EN Dryer programme is interrupted?
    • M
      Melissa ForbesAug 17, 2025
      If the drying programme has been interrupted, ensure that the loading door is properly closed. If there was a power failure, press the Start/Pause key to restart the programme. Also, the water tank might be full, so empty it.
  • C
    Caleb WongAug 20, 2025
    What to do if the program can not be started and both condenser and filter warning leds are blinking on my Sharp Dryer?
    • M
      Ms. Susan Garcia MDAug 20, 2025
      If the program cannot be started and both condenser and filter warning leds are blinking, it may be because the condenser and filter may not be placed, so replace the filter and condenser. If the filter and condenser warning leds are blinking even though the filter and condenser are placed, call technical service.
  • E
    Elizabeth SmithAug 22, 2025
    Why does my Sharp Dryer take so long to dry?
    • C
      chapmananthonyAug 22, 2025
      Several factors can cause the drying process to take longer than expected: * The lint filter surface might be clogged, so wash it with lukewarm water. * The condenser might be clogged, so clean the condenser. * The ventilation grills in front of the machine might be closed, so open the doors/windows to prevent the room temperature from rising too much. * There might be a layer of limescale on the humidity sensor, so clean the humidity sensor. * The dryer might be overloaded with laundry, so do not overload it. * The laundry might be insufficiently spun, so select a higher spin speed on your washing machine.
  • J
    Joseph GonzalezAug 26, 2025
    What does it mean if the condenser cleaning warning symbol is on my Sharp KD-NCB8S7PS91-EN?
    • V
      Valerie Lewis DVMAug 26, 2025
      If the condenser cleaning warning symbol is illuminated, it indicates that the condenser might be unclean, so you should clean it.
  • M
    Michelle DixonAug 28, 2025
    What to do if the program can not be started and the filter warning led is blinking on my Sharp KD-NCB8S7PS91-EN Dryer?
    • A
      Amanda WrightAug 28, 2025
      If the program cannot be started and the filter warning led is blinking, it may be because the filter seat is clogged by lint, so clean the filter seat. Alternatively, there might be a layer that causes obstruction on the surface of the lint filter, so wash the filter with lukewarm water. Finally, the condenser may not be placed, so replace the condenser.
  • J
    Julia RussellAug 31, 2025
    What to do if laundry is damp after drying in my Sharp Dryer?
    • E
      Eric ChambersAug 31, 2025
      If your laundry is coming out damp, it could be due to several reasons. First, the programme used might not be suitable for the type of laundry, so check the care labels and select a suitable programme, also consider using the time programmes. Additionally, the surface of the lint filter or the condenser might be clogged, so wash the filter with lukewarm water and clean the condenser. Finally, the dryer might be overloaded or the laundry might be insufficiently spun, so avoid overloading the dryer and select a higher spin speed on your washing machine.
  • J
    johnsonlawrenceSep 3, 2025
    Why is the water tank warning symbol on my Sharp KD-NCB8S7PS91-EN Dryer?
    • J
      Jennifer CunninghamSep 3, 2025
      The water tank warning symbol indicates that the water tank might be full, so empty it. Also, if the product is connected directly to the water outlet, the water discharge hose might be bent, so check the water discharge hose.
  • M
    Mr. Joshua GillSep 5, 2025
    Why do clothes shrink in my Sharp KD-NCB8S7PS91-EN Dryer?
    • T
      Tamara BoyleSep 5, 2025
      Clothes may shrink, felt, or deteriorate if the selected programme isn't suitable for the laundry type. Check the care labels on your laundry items and select an appropriate programme.
  • T
    Tina RussellSep 8, 2025
    How to clean the lint filter on Sharp Dryer?
    • M
      mitchellnathanSep 8, 2025
      If the filter cleaning warning symbol is on, the lint filter might be unclean, so clean the filter. Also, the filter seat might be clogged by lint, so clean the filter seat. There might be a layer that causes obstruction on the surface of the lint filter, so wash the filter with lukewarm water.
  • B
    Brandon McgeeSep 12, 2025
    What to do if water is leaking from the Sharp KD-NCB8S7PS91-EN loading door?
    • D
      Debbie BraunSep 12, 2025
      If you notice water leaking from the loading door, it's likely due to lint accumulated on the inner surfaces of the loading door and on the surfaces of the gasket of the loading door. Clean these surfaces to resolve the issue.

Sharp KD-NCB8S7PS91-EN Specifications

General IconGeneral
Appliance placementFreestanding
Loading typeFront load
Drying systemHeat pump
Rated capacity8 kg
Noise level65 dB
Heat sourceElectric
Drying programsWool
Width596 mm
Depth609 mm
Height845 mm

Related product manuals