EN - 24
PROBLEM REASON SOLUTION
Water leaking from the loading door.
There might be lint accumulated on
the inner surfaces of the loading
door and on the surfaces of the
gasket of the loading door.
Clean the inner surfaces of the
loading door and the surfaces of the
gasket of the loading door.
The loading door opens on its own.
The loading door might not be
closed properly.
Push the loading door until you hear
the closing sound.
The water tank warning symbol is
The water tank might be full. Empty the water tank.
The water discharge hose might
be bent.
If the product is connected directly
to the water outlet, check the water
discharge hose.
The condenser cleaning warning
symbol is on.
The condenser might be unclean. Clean the condenser.
The lter cleaning warning
symbol is on.
by lint.
There might be a layer that causes
obstruction on the surface of the
The program can not be started and
by lint.
There might be a layer that causes
obstruction on the surface of the
The condenser may not be placed. Replace the condenser.
The program can not be started and
leds are blinking
be placed.
leds are blinking even though the
Call technical service.
To Next Page
Loading...
Need help?
General