16
REMOVE OF LATCH BUTTON
1. Insert at type screwdriver into the gap between a latch button and panel ring.
2. Pry the latch button from the panel ring.
3. Now the latch button and the latch spring are free.
Fig. 10.
CAUTIONS IN ASSEMBLY
1. Setting cord reel ass’y.
Be sure to set the cord reel lead wires through type holes provided in the recess of the
body.
2. Afxing the display cushion.
Peel the backing from the display cushion and afx the display cushion inside the border of the
key top.
3. Installing the body.
When installing the body, make sure internal lead wires are not routed over the spacer before
tightening screws (4).
Latch button
Panel ring
Flat type screwdriver
To Next Page
Loading...
