Inner lid disassemble
Lift up the steam cap
Press H
button
more than 2 seconds
Press
H M
button
to adjust time
Press button
to complete the adjustment
Timer was unable to adjust if the power cord not connected.
In the process of cooking, keep warm & presetting, timer are unable to adjust.
Please press OFF button to finish timer adjustment when the timer display is blinking and the timer
does not work.
Disassemble
For example: Please set up the time 1:10 (that is to say , display 13:10)
Cautions to user
Close
Hold the
handle
Disassemble the steam cap from
the body by pulling upwards
Turn counter clockwise and pull.
Match the steam cap position and turn it in
the direction of the arrow until you hear a
clicking sound
Raise it after pressing
Pull the lid towards you
Please insert the convex part of inner lid (superior side) into the locker on the outer lid
and push it.
Please make sure insert the convex part of inner lid (inferior side) into the inside of
convex part lid (place 2).
Inner lid assemble
Insert and push inside
Insert ( inferior side)
Installation of inner lid (inside)
Convex part of inner lid
Convex part of inner lid
Convex part of lid
Cover of
steam cap
Top lid of
steam cap
Cover of
steam cap
at this moment, the timer start
blinking
at this moment, the timer keep
blinking.
It is able to adjust the time
quickly if continue pressing this
button.
the timer will start after the
timer adjustment finish.
Operation:
D) DIASSEMBLE OF INNER LID AND STEAM CAP
Timer [This clock displays time in a 24hours format;
12 o'clock midnight is set as 0:00, 12 o'clock noon is set as 12:00]
KEEP
WARM
CANCEL
4
Insert the steam cap in the hole
for assembly
J) CLEANING
(Cleaning the rice cooker after unplugging and allowed it to be cool off)
RICE COOKER BODY TOP LID
INNER POT, INNER LID
Caution
INNER POT
HEATING PLATE, SENSOR
Clean the rice scoop and inner pot with a
sponge.
Use a damp cloth to remove the object
stuck to the sensor and heating plate.
(Rice Scoop) ( Inner Pot)
Do not wash roughly when washing the inner
pot and inner lid
When the lid has become cool, take down and
open the steam vent to clean it.
Replace the inner pot if distorted or dented at the appointed service centre.
To protect the non-stick coated surface of the inner pot:
Use the supplied rice scoop.
Do not use the pot to wash kitchen utensils.
Do not use vinegar.
Heating plate
Sensor
Inner pot always uses water and steam that
might leave stains. However, it is not
harmful to our health.
11
Wipe with clean cloth.
When cleaning the rice cooker, do not use
polished powder, nylon brush, benzene and
others. Please assemble the lid after
cleaning.
To Next Page
Loading...
