PUBLIC MODE SETTING PROCEDURE
1. How to start Public Mode
•
There are the following two ways to get the public mode setup screen displayed.
1
In the adjustment process mode, turn on "HOTEL MODE". Also press the "CH (
r
)" and "VOL (+)" keys
on the set at once and turn on the power.
2
1) Press the "INPUT" and "VOL (+)" keys on the set at once and turn on the power.
2) Get the password input screen displayed.
Procedure
•
The input starts with the leftmost digit.
•
Use the numeric keys [1] thru [9] and [0] keys on the remote con
-
troller. The other keys are not acceptable.
•
With a numeric-key input, "–" will change to "
✽
". The input position
will move one digit to the right.
•
With all the 3
digits entered, the password will be verified.
3) The 3-digit password is now verified.
The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever ad-
justment process settings.)
With any other passwords, the screen changes to the normal mode.
— — —
✽
— —
✽
✽
✽
To Next Page
Loading...
Need help?
General