Sharp LC-20SH21U - Changing Channels; Press the Button

17
Basic Operation (Continued)
To select a digit channel number (e.g. Channel 5.1):
Complete the following procedure within 4 seconds.
Press the button.
Press the button.
Press the
button.
Press the
ENT
button.
Ƈ Using FLASHBACK
Ƈ
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel.
Ƈ
Press FLASHBACK again to switch back to the currently
tuned channel.
Changing Channels
You can select channels using Channel Select
(0-9,
•
(DOT), ENT) or CH ( )/( ).
• This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
Ƈ Using Channel Select (0-9, • (DOT), ENT)
When selecting the channel using Channel Select,
complete input of the channel number by holding down the
button for the last digit for a moment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
Press the
button. Press the button.
Press the
ENT
button.
To select a 3-digit channel number (e.g. Channel 115):
Complete the following procedure within 4 seconds.
Press the
button. Press the button.
Press the
button. Press the
ENT
button.
1
1
3
2
2
1
3
2
3
4
4