9 10
Programme Setup (Continued) Programme Setup (Continued)
Picture menu
Setup menu
Manual Adjust
You can set some channel item manually.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select the desired menu item.
4
Press
c
/
d
to select the desired item.
5
Press MENU or EXIT to exit menu screen.
H
Programme
The channel position changes to the higher or lower
number.
H
Label
To enter the name of the channel. Maximum 6
alphanumeric can be input.
• Press
a
/
b
: To select a desired alphanumeric.
• Press
c
/
d
: To move to the desired alphanumeric
position.
• To exit, press
c
/
d
until input cursor disappear.
• If the wrong alphanumeric is entered, select [ ] to clear.
H
Colour System
Select the optimum colour system to receive.
H
Sound System (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive.
H
Manual
• Press
c
/
d
then can adjust the signal frequency
manually.
• Press
c
/
d
for more than 2 seconds, the “Manual
Channel Tuning” will start. If a signal is found, the
Manual Channel Tuning will stop searching.
• Instead of pressing
c
/
d
to adjust the frequency,
you can set by directly entering the frequency
number of the channel with 0 – 9.
H
Skip
Channels with “Skip” set to “On” are passed over
when using CH
r
/
s
even if selected while
watching the image from the TV.
Movie
[ 30]
[0]
[0]
[0]
[0]
[0]
Brightness
Colour
Sharpness
Backlight
Tint
Colour Temp.
Reset
Contrast
MENU
[
Picture
]
Picture Audio Setup Feature
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Picture”.
3
Press
a
/
b
to select the desired menu item.
4
Press
c
/
d
to adjust the item to the desired
level.
5
Press MENU or EXIT to exit menu screen.
H
Picture adjustments
Selected item
c
button
d
button
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Sharpness For less sharpness For more
sharpness
Backlight The screen dims The screen
brightens
Tint Skin tones become
reddish
Skin tones become
greenish
Colour Temp.
(Colour
Temperature)
White with reddish
tone
White with bluish
tone
NOTE
• For resetting all adjustment items to factory preset values,
press
a
/
b
to select “Reset”, and then press
c
/
d
to
select “On”.
H
Erase programme
Delete TV2 at programme number 2.
1
Repeat steps 1 to 2 in Manual Adjust.
2
Press
a
/
b
to select “Sort”, and then press
ENTER. Sort menu will be displayed.
3
Press
a
/
b
/
c
/
d
to select programme number
2 (e.g. TV2) to be deleted, and then press RED
button.
5
Press MENU or EXIT to exit menu screen.
H
(Programme Lock)
• On: (Programme Lock) will lock the viewing of
the selected channel. (e.g.1)
(See page 12 to “Activate ” and “Password” from
“ Programme” under the “Feature” menu.)
• Off: (Programme Lock) is deactivated.
H
Booster
Enhance the picture quality during weak signal.
It is not recommended to turn on during strong
signal condition. It may induced unwanted noise.
On
t
Off
Sort
Channel position can be sorted freely.
H
Moving a programme
TV1 (at programme number 1) to programme
number 3.
1
Repeat steps 1 to 2 in Manual Adjust.
2
Press
a
/
b
to select “Sort”, and then press
ENTER. Sort menu will be displayed.
3
Press
a
/
b
/
c
/
d
to select programme number 1
(e.g. TV1) to be moved, and then press GREEN
button.
5
Press MENU or EXIT to exit menu screen.
1
Repeat steps 1 to 2 in Manual Adjust.
2
Press
a
/
b
to select “Teletext” or “Language”.
3
Press
c
/
d
to select the desired item.
4
Press MENU or EXIT to exit menu screen.
H
Teletext*
Select from among 3 kinds of language: West
Europe, East Europe, Cyrillic.
NOTE
• Teletext* can display only when it is sent by a network. Not
used to convert between languages.
* Teletext function is not applicable for Philippines market.
H
Language
Select from among 4 languages: English, French,
Portuguese, Arabic.
LC22L50M-L50M_EN.indd 5LC22L50M-L50M_EN.indd 5 9/14/09 2:44:51 PM9/14/09 2:44:51 PM
To Next Page
Loading...
