EasyManuals Logo

Sharp LC-26S7E-BK User Manual

Sharp LC-26S7E-BK
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
2008-03-14
LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
33
No picture on the display (1)
The picture doesn't appear in all modes.
MAIN UNIT:
NO
YES
YES
PANEL_UNIT:
YES
YES
No picture on the display (2)
Does not the picture come out when VHF/UHF is received?
TERMINAL UNIT:
MAIN_UNIT: YES
YES
Is LCD controller's control signal normal?
Is the above-mentioned LVDS signals output to connector
NO
Check the line between IC U4201 and CN7502.
NO
Control signals BRIGHT_ADJ, INVERTER_ON_OFF,
PANEL_PWR, and it peels off and whether normality is checked.
Check the panel module.
Similarly, is the LVDS signal input to connector of the panel
module?
NO
FFC cable is checked.
Is LVDS signal output from 1st_channel and 2nd_channel of IC U4201 in each mode?
(RXO0+/RXO0-),( RXO1+/RXO1-),( RXO2+/RXO2-),( RXO3+/RXO3-),( RXOC+/RXOC-)
Check IC U4201 and its peripheral control circuits.
Is picture signal input from pin (16) of TUNER (TU1101) to pin
35(CVBS0) of IC U4201?
Is TUNER_CVBS signal output from pin (16) of TUNER (TU1101)?
NO
Check whether I2C is normally accessed between TU201 and IC
U400.
NO
Check the line between IC U4201and TU1101.
Refer to The picture doesn't appear in all modes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-26S7E-BK and is the answer not in the manual?

Sharp LC-26S7E-BK Specifications

General IconGeneral
Game modeNo
Teletext functionYes
Display diagonal26 \
Display brightness450 cd/m²
Display resolution1366 x 768 pixels
Display technologyLCD
Viewing angle, vertical150 °
Contrast ratio (typical)800:1
Viewing angle, horizontal160 °
RS-232 ports0
Headphone outputs1
SCART ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product colorBlack
Panel mounting interface200 x 100 mm
Power consumption (sleep)0.19 W
Power consumption (standby)0.21 W
Power consumption (typical)67.6 W
RMS rated power10 W
Tuner typeAnalog
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)239.8 mm
Width (with stand)657.8 mm
Height (with stand)491.1 mm
Weight (with stand)8400 g
Depth (without stand)91.6 mm
Height (without stand)448.4 mm

Related product manuals