LC-32D41U/LC-32M41U/LC-40C32U
5 – 15
2.9. Code list for Standby Cause
20 OPC33 ADLEVEL 14
OPC33 ADLEVEL 15
OPC33 ADLEVEL 16
OPC33 ADLEVEL 17
OPC33 ADLEVEL 18
OPC33 ADLEVEL 19
OPC33 ADLEVEL 20
OPC33 ADLEVEL 21
OPC33 ADLEVEL 22
21 OPC33 ADLEVEL 23
OPC33 ADLEVEL 24
OPC33 ADLEVEL 25
OPC33 ADLEVEL 26
OPC33 ADLEVEL 27
OPC33 ADLEVEL 28
OPC33 ADLEVEL 29
OPC33 ADLEVEL 30
OPC33 ADLEVEL 31
22 V6 OS THERMO 1
V6 OS THERMO 2
V6 OS THERMO 3
V6 OS THERMO 4
V6 OS THERMO 5
V6 OS THERMO 6
V6 OS THERMO 7
23 V5 OS THERMO 1
V5 OS THERMO 2
V5 OS THERMO 3
V5 OS THERMO 4
V5 OS THERMO 5
V5 OS THERMO 6
V5 OS THERMO 7
24 MONITOR TIME OUT
MONITOR MAX TEMP
MONITOR STANDBY CAUSE
25 LCD TEST PATTERN
26 KEY LOCK(1217)
KOUTEI AREA ALL CLEAR
A MODE AREA CLEAR
BACKUP AREA CLEAR
B MODE AREA CLEAR
EXECUTION
27 EEP SAVE
EEP RECOVER
STANDBY CAUSE RESET
Code Indication Description
1 RC_STNBY /* Standby set by remote control */
2 E_CCKMVT /* Abnormal voltage of CCKM line detected */
5 OUT_OF_R “/* While a PC display is on, unspecified input continued long time. */”
6 NO_OPERT /* Off caused by no operation */
7 NO_SIGNA /* Off caused by no signal */
8 PC_MODE1 /* Set by the PC power management mode 1 */
9 PC_MODE2 /* Set by the PC power management mode 2 */
A SLEEP_TM /* Set by off timer */
B E_NOMONI /* Incompatible monitor is connected to the AVC center. */
Page Line Item
To Next Page
Loading...
Need help?
General