LC-32/40/46/52LE700UN
4 – 11
10. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (LC-46LE700UN).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 10 lock screws ,16 lock screws and detach the Bezel Ass’y .
2. Remove the 4 Clip and detach the 46” LCD Panel Module and Panel Chassis Ass’y .
3. Detach the 2 Lens Sheet and Diffusion Plate .
4. Remove the 32 Push Rivets and 11 Support Pins and detach the Reflection Sheet .
5. Remove the 66 Push Rivets .
6. Remove the 11 Terminators and 22 connections and detach the 6 LED8 PWB1 Units , 5 LED8 PWB2 Units .6 LED6 PWB1 Unit
and 5 LED6 PWB2 Unit .
7. Detach the 6 LED5 PWB1 Units and 5 LED5 PWB2 Units .
8. Disconnect the connecting cords from the 11 connectors of the LED5 PWB1/2 Unit.
9. Detach the Back Light Chassis .
10.Detach the 2 Connecting Cord and 2 Ferrite Core .
11.Remove the 6 lock screws and detach the LCD Control Unit .
䎔䎛
䎔
䎕
䎗
䎖
䎘
䎙
䎚
䎜
䎔䎔
䎔䎚
䎔䎙
䎔䎖
䎔䎖
䎔䎗
䎔䎕
䎔䎘
䎕䎔
䎗䎙䎅䎃䎯䎦䎧
䎳䏄䏑䏈䏏䎃䎃䎸䏑䏌䏗
䎥䏈䏝䏈䏏䎃䎃䎤䏖䏖䎊䏜
䎳䏄䏑䏈䏏䎃䎃䎦䏋䏄䏖䏖䏌䏖䎃
䎤䏖䏖䎊䏜
䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎧䏌䏉䏉䏘䏖䏌䏒䏑䎃䎳䏏䏄䏗䏈
䎥䏄䏆䏎䎃䎯䏌䏊䏋䏗䎃
䎦䏋䏄䏖䏖䏌䏖
䎩䏈䏕䏕䏌䏗䏈
䎦䏒䏕䏈
䎦䏒䏑䏑䏈䏆䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎯䎦䎧䎃䎦䏒䏑䏗䏕䏒䏏䎃
䎃䎸䏑䏌䏗
䎦䏏䏌䏓
䎵䏈䏉䏏䏈䏆䏗䏌䏒䏑䎃䎶䏋䏈䏈䏗
䎶䏘䏓䏓䏒䏕䏗䎃䎳䏌䏑
䎳䏘䏖䏋䎃䎵䏌䏙䏈䏗
䎕䎖
䎕䎕
䎛䎃
䎔䎓
䎔䎜
䎕䎓
䎕䎗
䎕䎘
To Next Page
Loading...
Need help?
General