LC-32/40/46/52LE700UN
4 – 13
12. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (LC-52LE700UN).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 12 lock screws ,16 lock screws and detach the Bezel Ass’y .
2. Remove the 6 Clip and detach the 52” LCD Panel Module and Panel Chassis Ass’y .
3. Detach the 2 Lens Sheet and Diffusion Plate .
4. Remove the 43 Push Rivets and 11 Support Pins and detach the Reflection Sheet .
5. Remove the 72 Push Rivets .
6. Remove the 12 Terminators and 24 connections and detach the 12 LED8 PWB1 Units and 12 LED8 PWB2 Units .
7. Detach the 6 LED6 PWB1 Units and 6 LED6 PWB2 Units .
8. Disconnect the connecting cords from the 12 connectors of the LED6 PWB1/2 Unit.
9. Detach the Back Light Chassis .
10.Detach the 2 Connecting Cord and 2 Ferrite Core .
11.Remove the 6 lock screws and detach the LCD Control Unit
䎔䎛
䎔
䎕
䎗
䎖
䎘
䎙
䎚
䎜
䎔䎔
䎔䎚
䎔䎙
䎔䎘
䎔䎖
䎔䎗
䎔䎘
䎔䎜
䎕䎓
䎕䎔
䎘䎕䎅䎃䎯䎦䎧
䎳䏄䏑䏈䏏䎃䎃䎸䏑䏌䏗
䎥䏈䏝䏈䏏䎃䎃䎤䏖䏖䎊䏜
䎳䏄䏑䏈䏏䎃䎃䎦䏋䏄䏖䏖䏌䏖䎃
䎤䏖䏖䎊䏜
䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎧䏌䏉䏉䏘䏖䏌䏒䏑䎃䎳䏏䏄䏗䏈
䎥䏄䏆䏎䎃䎯䏌䏊䏋䏗䎃
䎦䏋䏄䏖䏖䏌䏖
䎩䏈䏕䏕䏌䏗䏈
䎦䏒䏕䏈
䎦䏒䏑䏑䏈䏆䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎯䎦䎧䎃䎦䏒䏑䏗䏕䏒䏏䎃
䎃䎸䏑䏌䏗
䎦䏏䏌䏓
䎵䏈䏉䏏䏈䏆䏗䏌䏒䏑䎃䎶䏋䏈䏈䏗
䎶䏘䏓䏓䏒䏕䏗䎃䎳䏌䏑
䎳䏘䏖䏋䎃䎵䏌䏙䏈䏗
䎕䎖
䎕䎕
䎛
䎔䎓
䎔䎖
䎔䎗
䎔䎕
To Next Page
Loading...
Need help?
General