Sharp LC-32R24B - CHAPTER 1. OPERATION MANUAL; Remote Control Unit

LC-32R24B
1 – 3
1
3
6
7
10
9
5
4
8
2
12
13
17
18
20
21
22
19
14
15
16
11
Part Names
1 POWER: Switch the TV power on or enters standby.
20–9: Set the channel.
3 (DOT): Jumps to a channel after selecting with the 0–9
buttons.
4 SURROUND: Select Surround settings.
5 FREEZE: Set the still image. Press again to return to
normal screen.
6 SLEEP: Set the sleep timer.
7EXIT:Turn off the menu screen.
8CC:Display captions from a closed-caption source.
9 AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts.
10 FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4 different
categories.
While watching, you can toggle the selected channels by
pressing A, B, C and D.
11 DISPLAY: Display the channel information.
12 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2,
INPUT 3, INPUT 4, INPUT 5, INPUT 6)
13 MUTE: Mute the sound.
14 VOL / : Set the volume.
15 CH / : Select the channel.
16 ENT: Jumps to a channel after selecting with the 0–9
buttons.
17 FLASHBACK: Return to the previous channel or external
input mode.
18 MENU: Display the menu screen.
19 ///,ENTER: Select a desired item on the screen.
20 RETURN: Return to the previous menu screen.
21 VIEW MODE: Select the screen size.
22 AV MODE: Select an audio or video setting.
(When the input source is TV, INPUT 1, 2 or 3:
STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed),
DYNAMIC. When the input source is INPUT 4, 5 or 6:
STANDARD, MOVIE, GAME, PC, USER, DYNAMIC
(Fixed), DYNAMIC)
Remote Control Unit
When using the remote control unit, point it at the TV.
There is a protective film covering the face of the remote
control. Please remove this film before use.