On-Screen Display Menu
6 Dudng the data checking, "CheckEng" bIFnks. 7 PressENTER to start updating.
The screen becomes dark for a while until the update
screen can be displayed, Please wait for the update
screen to appear Do not unplug the AC cord
The current version of the %/softwale and the ve/sion
of the update file on the USB memory device are
displayed To update the %/software with the update
file, select "Yes", and then press ENTER
Example
• If the USB memory device is not properly instafled or
the cor/ect update file cannot be found on the USB
memory device, an erlor message is displayed.
Check the file on the USB memory device, and then
re]nsert the USB memory device correctly
!
Example
Do not remove the USR memory device or unplug the
AC cord while the software is being updated,
8 When the sottware is succesdufly updated, a
screen is displ_yed EndEcating that the update
process is completed.
After thEs screen is dEsplayed, the TV automatically
turns off and then turns on again.
• If the update has failed, check the file in the USB
memory device and try So.rare Update again
9 After the screen shown below is displayed, press
ENTER.
10 Remove the USB memory device.
27
To Next Page
Loading...
Need help?
General