QUICK REFERENCE
o ,_ t= -= ± ok D
1 Attach your antenna to the back of the tebvision. :3 Bundle the cords properly with the cable clamp.
(See page 8.)
2 outlet.C°nnecttheACplugf°rthetelevisi°nint°theAC SJ
• Place the TV close to the AC outlet, and keep the power
plug within reach
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WiTH THE AC CORD CONNECTED.
4 How to turn on the television for the first time.
A) Press POWER on the television.
B) The POWER indicator on the front of the
television lights GREEN.
co "_" ';' ;_ II POWER
• Speakers cannot be detached from the _V.
• TV angle cannot be adjusted
Use the remote co_trol u_flt by pointing it towards the remote co_trol sensor on the TV. Objects between the
remote control unit and the remote control sensor may prevent proper operation.
[] Cautions regarding the remote control unit
Do not expose the remote control unit to shock In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity,
_ Pr2q_R SLE' O_O _ " Do not install or place the remote control unit under direct
O O O O J sunlight, The heat may cause deformation of the remote
control unit
Remote Control sensor • The remote control unit may not work propedy if the remote
/ k
_0° control sensor on the TV is under direct sunlight or strong
17 (5m) lighting.In such cases, change the angle of the lighting
or the _V, or operate the remote control unit closer to the
remote control sensor
The POWER indicator ors the television should lightGREEN irldicating you have power to the television,
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on
iMPORTANT:
IF THE UNIT DOES NOT POWER ON UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION
STEPS
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1 800 BE SHARP
To Next Page
Loading...
Need help?
General