On-Screen Display Menu
This setting allows you to optimize the settings of
Digital broadcasting.
Example
[_] Digital Setup
1 Press MENU to display the MENU screen, and then
press _1/_- to select "Digital Setup".
2 Press A/_' toselect a specific adjustment item,
and then press ENTER.
3 Press A/_' (or 4/_-)to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the %/. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM"
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital
The current version of the TV software is displayed.
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the %/.
To check for the availability of a software update, visit
www.sharpusa.com. If you have any questions, please
call 1 800 BE-SHARP (800 237 4277).
Do not remove the USEI memory device or unplug the
AO cord while the software is being updated,
• Be sure to properly follow the whole procedure
described below, step by step, Otherwise, for
example, the TV cannot read the data in the USE
memory device and software updating will fail,
1 Insert the USB memory device with the update file
into the SERVICE terminal on the %/.
2 Press MENU to display the MENU screen, and
then press _/1_ to select "Digital Setup".
3 Press A/T to select "Sottware Update", and then
press ENTER.
If you have already set the Seclet No, go to step 4
[_ Digital Setup
Software Update j
4 Input the 4 digit secret number by using 0-9.
_ Digital Setup
5 Press ENTER to start checking the data in the
USB memory device.
26
To Next Page
Loading...
Need help?
General