Sharp LC-37A37M - 3. Removing of PWB Units

LC-37A37M
4 – 3
3. REMOVING OF PWB UNITS
1. Remove the 1 screw [1] and detach the R/C, LED PWB Unit.
2. Remove the 6 screws [2] and detach the MAIN PWB Unit.
3. Remove the 4 screws [3] and detach the POWER PWB Unit.
4. Remove the 4 screws [4] and detach the INVERTER PWB Unit.
5. Remove the 1 screw [5] and detach the KEY PWB Unit.
6. Remove the 2 screws [6] and detach the SW Bracket.
7. Remove the 4 screws [7] and detach the VESA Angle.
1
6
3 4
2
KEY PWB Unit
Front Cabinet
MAIN PWB Unit
VESA Angle
POWER PWB Unit
INVERTER PWB Unit
SW Bracket
R/C, LED PWB Unit
7
5