LC-37XD1E/RU SUPPLEMENT
1 – 1
LC-37XD1E
Service Manual
CHAPTER 1. ADJUSTMENT PROCEDURE
[1] ADJUSTMENT PROCEDURE
The adjustment values are set to their optimum at the factory before shipping.
If by any chance a value should become improper or a readjustment is required due to part replacement, make an adjustment according to the follow-
ing procedure.
1. After replacement of any PWB and/or IC for repair, note the following.
When replacing the following units, be sure to prepare the new units loaded with updated software.
MAIN-UNIT: DUNTKD915FM09
NOTE: That an IC into which ROM data is written is available for MAIN-UNIT servicing (see below).
IC1901 RH-iXB936WJZZS EDID(HDMI)
IC1902 RH-iXB937WJZZS EDID(HDMI)
IC2303 RH-iXB938WJZZS EDID(PC)
2. Software Upgrade
• Software service extension cable QCNWGA015WJPZ
3. Remote controller key operation and description of display in adjustment process mode.
• Description of display.
(3) Current page item
(1) Current page title
[INIT]
To Next Page
Loading...
