Sharp LC-52/60LE833ELC-60LE830E - Page 37

LC-52/60LE830E,RU/831E,S/833E
5 – 7
23/24 [ETC]
1 ERROR STANDBY CAUSE1 NO RECORD ERROR STANDBY CAUSE
2 ERROR STANDBY CAUSE2 NO RECORD
3 ERROR STANDBY CAUSE3 NO RECORD
4 ERROR STANDBY CAUSE4 NO RECORD
5 ERROR STANDBY CAUSE5 NO RECORD
6 STANDBY CAUSE RESET OFF Reset stand by cause.
24/24 [ETC]
1 EEP SAVE OFF Writing setting values to EEPROM.
2 EEP RECOVER OFF Reading setting values from EEPROM.
3 MONITOR ERROR CAUSE RESET OFF Reset of monitor error cause
4 MODEL NAME LE830E MODEL NAME
5 PANEL SIZE 46 Panel size setting.
6 PANEL LIMIT ON PANEL LIMIT
7 PANEL RANGE LIMIT xxx PANEL RANGE LIMIT
8 SHORT CHECK MODE Enter Check LED Back light
9 SHORT CHECK CURRENT 60
10 CURRENT SW LOW
11 PRODUCT EEP ADR 0x 0 Don't touch when serving (for producer of factory)
12 PRODUCT EEP DATA 0x 0 Don't touch when serving (for producer of factory)
13 PRODUCT FACTORY 1 Don't touch when serving (for producer of factory)
Page Line Item Description Remarks (adjustment detail, etc.)