Sharp LC-52LE700E Service Manual

LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
4 – 7
6. Removing of Support Angle.
32/40 inch models
1. Remove the 6 lock screws (32 inch models) , 16 lock screws (40 inch models) and detach the Support Angle .
2. Remove the 8 hooks (32 inch models), 7 hooks (40 inch models) and detach the LCD Panel Module Unit.
46/52 inch models
3. Remove the 4 lock screws and 8 lock screws and detach the VESA Angle and Support Angle .
4. Remove the 4 hooks (46 inch models), 4 hooks (52 inch models) and detach the LCD Panel Module Unit.
䎗䎙䎒䎘䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖
䎖䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖
䎶䏘䏓䏓䏒䏕䏗䎃䎤䏑䏊䏏䏈
䎔
䎔
䎔
䎔
䎶䏘䏓䏓䏒䏕䏗䎃䎤䏑䏊䏏䏈
䎗
䎗
䎶䏘䏓䏓䏒䏕䏗䎃䎤䏑䏊䏏䏈
䎗
䎔
䎔
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈
䎖
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈
䎖
䎕
䎕
䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖
䎫䏒䏒䏎䎃
䎋䎖䎕䎒䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎖䎕䎒䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎙䎒䎘䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎙䎒䎘䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎖䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎖䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎯䎦䎧䎃
䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗
䎫䏒䏒䏎䎃
䎋䎖䎕䎒䎗䎙䎒䎘䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎖䎕䎒䎗䎙䎒䎘䎕䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌
䎫䏒䏒䏎䎃
䎋䎗䎓䎃䏌䏑䏆䏋䎃䏐䏒䏇䏈䏏䏖䎌

Sharp LC-52LE700E Specifications

General

Display diagonal	52 \
Display brightness	450 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Viewable size diagonal	1320 mm
Contrast ratio (dynamic)	3000000:1
Contrast ratio (typical)	4000:1
Viewing angle, horizontal	176 °
Power requirements	AC 220-240 V / 50 Hz
RS-232 ports	1
HDMI ports quantity	4
SCART ports quantity	2
Component video (YPbPr/YCbCr) in	3
Product color	Black
Tuner type	Analog & digital
Analog signal format system	NTSC

Weight and Dimensions

Depth (without stand)	95 mm
Width (without stand)	1238 mm
Height (without stand)	765 mm
Weight (without stand)	27600 g