On-Screen Display Menu
• • • - =e - • • -
You carl adjust the sound quality to your preference Power control setting alows you to save energy.
with the following settings. Example
Example
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio Decrease auclo
from the right from the left
speaker speaker
, Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 25.)
, For resetting all Audio adjustment items to the factory
preset values, press _./T to select "Reset", press ENTER,
press _/1_ to select "Yes", and then press ENTER.
The current setting of AV Mode is displayed. (See page
15 for details of AV Mode settings.)
The surround function produces Surround effect from
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
, Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 250
, For some discs, setup may be required on your BD/DVD
player. In this case, please refer to the operation manual of
your BD/DVD player.
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
, Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 25.)
This function allows the TV to automatically shut the
power down when there is no signal received.
Enable: The power will automatically shut down if there is
no signal for 15 minutes.
Disable: This function does not work.
o When it is I minute before the power shuts down, the
remaining time will start to appear.
o When a TV program finishes, this function may not operate.
You can set the time length the TV takes to automatically
shut the power down when there is no operation.
30 rains/3 hours/Disable
o When it is 1 l_inute before the power shuts down, the
remaining time will start to appear.
2O
To Next Page
Loading...
