On-ScreenDisplay Menu
Example
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home: AV Mode is setto "STANDARD(ENERGYSTAR)".
Store: AV Mode isset to "DYNAMIC(Fixed)".
= ENERGYSTARqualificationis basedon AV Mode
"STANDARD(ENERGYSTAR)".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
o See Initial Installation on page 13 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try "EZ Setup" again.
;_!_'_ ............
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip.
Show/Hide: Removesthe checkmarks to letthe channelsbe
skipped.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
o See Initial Installation on page 13 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try channel search again.
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
_1/1_ to select the new name for the input mode.
m Setting the Names to Your Preference
1 Press 41/1_ to select "Custom".
2 Press A/T" to enter the desired characters.
• You can use alphanumeric characters (including spaces
or some symbols) to set the name to your preference.
o If you press T when "Default" is selected, the "Custom"
setting display appears.
Determines whether the AUDIO IN terminal is used for
PC IN or HDMI IN 1.
HDMIt: Select this item when the audio signal is input via
the HDMI IN 1 terminal using a DVFHDMI conversion
cable.
PC IN: Select this item when the audio signal is input via
the PC IN terminal using an analog RGB cable (D sub
15 pin cable or VGA cable).
o When "PC Audio Select" is set to "HDMI1 ", sound will not
be produced if you use only an HDMFcertifled cable to
connect HDMI compatible equipment. To produce sound,
you should make an analog audio connection.
• If you want to connect HDMFcompatible equipment using
only an HDMFcertifled cable, set "PC Audio Select" to
"PC IN".
To watch an HDMI IN or PCqN equipment image,
select "HDMI1 ", "HDMI2" or "HDMI3" from the INPUT
SOURCE menu using INPUT on the remote control
unit or on the TV.
Enable: To use View Mode based on signal recognition,
including an HDMI signal.
Disable: No function.
o Refer to your external equipment operation manual for the
signal type.
o When connecting a DVI HDMI conversion adapter/cable to
the HDMI IN terminal, the image may not come in clearly.
You can output digital audio to an AV arrlplifier or
similar device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUT terminal on the
TV. Please select an audio output format compatible
with the audio format of the program you are watching
and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
21
To Next Page
Loading...
