On-ScreenDisplay Menu
Example
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
o The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE)
is pressed.
When this function is set to "On", tile LED on the front
of the TV turns on.
If you select "Off" for tile function, the confirmation
screen appears. Selecting "Yes" on the screen will turn
the LED off.
o "On" is the factory preset value.
Allows you to select what controls the audio output.
Fixed: Sound via speaker is adjusted with VOL+/- on
the remote control unit or on the TV.
Sound via the AUDIO OUT terminal is not adjustable
and outputs at a consistent level.
Variable: Sound via the AUDIO OUT terminal is adjusted
with VOL +/- on the remote control unit or on the TV.
Sound via speaker is muted.
N
Select the video signal system corrlpatible with your
equipment from the list below:
Auto/NTSC 3.58/PAL- M/PAL- N
o "Color System" can only be set for the VIDEO IN.
You can select a desired Closed Caption.
Off/CCI-CC4/TEXTf-TEXT4
You can select a desired service.
Off/Servicer-Service6
mMode
Default: The default settings will be displayed.
Custom: You can adjust the closed caption screen
appearance to suit your preference. The following items
can be adjusted.
Font Style/Font Size/Font Edge/Edge Color/
Font Color/Background Color/Font Opacity/
Background Opacity
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER. Press _./T/4/
to select the position in the category, and then press
ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press
A/T/_I/I_ to select the channel you want to delete, and
then press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
o Before setting the channel, select the channel you want to
register as a favorite channel.
Ordinarily you can easily adjust the picture as
necessary to change image position using "Auto
Sync.". In some cases, however, manual adjustment is
needed to optimize the image.
H-Position Centers the image by moving it to the
left or right.
V-Position Centers the image by moving it up or
down.
Clock Adjust when the image flickers with
vertical stripes.
Phase Adjust when characters have low
contrast or when the image flickers.
•%%_,
• For resetting all "Fine Sync." adjustment items to the factory
preset values, press _./T to select "Reset", press ENTER,
press 41/_- to select "Yes", and then press ENTER.
o It is not necessary to adjust the "Clock" or "Phase" when a
d_g_ta_s_gna_Jsbe,_g,_put,so_t.......tbeselected.
o The default cursor position may not be in the center,
You can switch the Closed Caption modes, because the screen position variable ranges may be
On: Displays the closed caption, asymmetrical.
Off: Does not display the closed caption.
25
To Next Page
Loading...
