Sharp LC-60LE600U - Page 17

LC-60/70LE600U
4 – 5
4. Removing of 60” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/LED DRIVE Unit.
1. Remove the 21 Hooks and detach the 60” LCD Panel Module Unit .
2. Remove the 2 FFC , 2 Ferrite Cores and 4 lock screws and detach the LCD CONTROL Unit .
3. Remove the 4 lock screws and detach the MAIN Unit and Term Angle side .
4. Remove the 2 lock screws and detach the Earth Angle .
5. Remove the 6 lock screws and detach the POWER Unit and AC Cord Barrier .
6. Remove the 12 lock screws and detach the 2 Stand FIX Angles Ass’y .
7. Remove the 16 lock screws and detach the 4 VESA Angles Ass’y .
8
Term Angle Side
10
Earth
Angle
9
6
7
6
MAIN Unit
䎔䎙
䎔䎚
䎔䎕
䎔䎔
䎔䎙
䎔䎘
䎔䎗
䎘
䎗
䎔䎗
䎔䎘
䎕
䎶䏗䏄䏑䏇䎃䎩䏌䏛䎃䎤䏑䏊䏏䏈
䎤䏖䏖䎊䏜
䎯䎦䎧䎃䎦䎲䎱䎷䎵䎲䎯
䎃䎸䏑䏌䏗
䎩䎩䎦
䎹䎨䎶䎤
䎤䏑䏊䏏䏈
䎤䏖䏖䎊䏜
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈䎃䎤䏖䏖䎊䏜
䎳䎲䎺䎨䎵䎒䎯䎨䎧
䎧䎵䎬䎹䎨䎃䎸䏑䏌䏗
䎙䎓䎅䎯䎦䎧䎃䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗
䎔
䎫䏒䏒䏎
䎫䏒䏒䏎
䎫䏒䏒䏎
䎫䏒䏒䏎
䎔䎙
䎔䎚
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈
䎤䏖䏖䎊䏜
䎔䎙
䎹䎨䎶䎤䎃
䎤䏑䏊䏏䏈
䎤䏖䏖䎊䏜
䎔䎖
䎔䎚
䎔䎚
䎶䏗䏄䏑䏇䎃䎩䏌䏛䎃䎤䏑䏊䏏䏈䎃䎤䏖䏖䎊䏜
䎤䎦䎃䎦䏒䏇䏈䎃
䎥䏄䏕䏕䏌䏈䏕
䎖
䎩䏈䏕䏕䏌䏗䏈䎃䎦䏒䏕䏈