QUICK REFERENCE
1 Attach your anten_a to the back of the televFsion.
(See page 8.)
2 Connect the AC plug for the television into the AC
outlet.
* Place the TV close to the AC outlet, and keep the power
plug within reach
o TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3 Place the Ferdte core in the space Endicated Enthe
below figure and bundle the cords propedy with
the cable clamp and the cable tee.
Use the remote control u_flt by pointing it towards the
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
IL
s°° i-- s°°
3o,
[] Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an alea with high humidity,
Do not install or place the remote contlol unit under direct
sunlight, The heat may cause deformation of the remote
contlol unit
• The remote control unit may not work ploperly if the remote
contlol sensor on the TV is under direct sunlight or stlong
lighting. In such cases, change the angle of the fighting
or the TV, or operate the remote control unit closer to the
remote control sensor
4 How to turn on the television for the first time.
A) Press POWER on the television.
B) The POWER indicator on the front of the
televisio_ lights GREEN.
'J
PdOiWER
= Speakers cannot be detached from the TV
• _/angle cannot be adjusted
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
p/ess POWER on the remote control to turn the power on
IMPORTANT:
IF THE UNIT DOES NOT POWER ON UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS
IF YOU STILL ENCOUNTER NO POWER PLEASE CONTACT
USAT 1 800 BE SHARP
To Next Page
Loading...
