Sharp LL-S242A-W Setup Manual

ENGLISH
11
E
Installation (Continued)
Turning Power ON/Off
Turning on the power
1. Press the POWER button.
Press
POWER button
Power LED
The power LED turns on.
2. Turn on the PC.
The screen appears.
Status Status of the monitor
Green lit Signal input
Orange lit No signal input
Alternately ashing red and
green
Abnormal temperature
Caution
• When switching the POWER button off and back on,
always wait for an interval of at least 5 seconds. Rapid
switching may lead to errors or malfunctions.
• For a complete electrical disconnection, pull out the main
plug.
Turning off the power
1. Turn off the PC.
2. Depress the POWER button for around 2 seconds.
Depress for around
2 seconds
POWER button
The power LED turns off.
Caution
• If the monitor will not be used for a long time, disconnect
the power plug from the power outlet.
2. Place the monitor where you want to use it.
n
LL-S242A-W
Horizontal position
Place the monitor on a table or other level surface.
1. Simply lay the unit on the desired location.

Sharp LL-S242A-W Specifications

General

Brand	Sharp
Model	LL-S242A-W
Category	Monitor
Language	English