Sharp LL-S242A-W User Manual

17
E
Installing on a table
(Pen writing position/Horizontal
position)
Remove the monitor from the stand and place face-down on a
table or other level surface.
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the ap. (LL-P202V)
• After removing the monitor from the rack stand, store the
stand so that the screws will not be lost.
n
LL-P202V
Pen writing position
Place the monitor on a table or other level surface.
1. Hold the ap by the depression on the back of the
monitor and pull the ap up.
Depression
2. Place the monitor where you want to use it.
Horizontal position
Place the monitor on a table or other level surface.
Caution
• When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.
2. Place the monitor where you want to use it.
n
LL-S242A-W
Horizontal position
Place the monitor on a table or other level surface.
1. Simply lay the unit on the desired location.

Sharp LL-S242A-W Specifications

General

Brand	Sharp
Model	LL-S242A-W
Category	Monitor
Language	English