Sharp LL-S242A-W User Manual

25
E
Monitor Settings
Touch mode selection
These icons switch the touch action mode.
A (
) mark is displayed at the top of the icon for the selected
mode.
The mode can be checked using the touch mark located on
the right-side of the screen. (See pages 26, 28)
On the LL-P202V, the icon pen design varies when the
digitizer pen is connected.
Finger/pen mode
This icon switches the touch action mode to  nger/pen
mode.
When using the touch pen (digitizer pen is not connected),
appears. When the digitizer pen is connected,
appears.
The touch mark (see page 28) becomes the  nger/pen
mark
or .
Pen-only mode
This icon switches the touch action mode to pen-only
mode.
When using the touch pen (digitizer pen is not connected),
appears. When the digitizer pen is connected,
appears.
The touch mark becomes the  nger/pen mark
or .
Finger-only mode
This icon switches the touch action mode to  nger-only
mode.
The touch mark becomes the  nger-only mark
.
Volume
This icon adjusts speaker and headphone volume.
Touching [Mute] temporarily sets the volume to 0.
Touching [Mute] again returns the volume to the previous
level.
Input Select
This icon manually switches the signal input source from the
PC.
Touching the icon displays HDMI and DisplayPort.
A (
) mark is added to the input source being displayed.
Setup
This icon con gures the monitor.
For details on individual settings, see page 26.
Exit
This icon closes the menu screen.
Menu functions
Exit Setup Input Select Volume Finger-only
mode
Pen-only
mode
Finger/pen
mode
Touch mode selection

Sharp LL-S242A-W Specifications

General

Brand	Sharp
Model	LL-S242A-W
Category	Monitor
Language	English