Sharp MD-M1 - Listening to External Audio Sources; Manual Recording from External Units

35
■ Listening to sound from an exter-
nal unit
To listen to sound from an external unit connected
to the analog input terminals:
■ Manual recording
You can start a recording manually while listening
to playback from other external equipment (Tape
deck, Tuner) connected to the auxiliary input.
1 Press the POWER button to turn the power on.
2 Press the AUX button.
3 Start playback on the external unit, and adjust
the input sound level using the AUX INPUT
LEVEL control.
● When the AUX INPUT LEVEL control is set to
MIN, no sound is obtained.
● Adjust the recording level so that the “OVER” in-
dicator does not light at the maximum level.
L
R
OVER
OVER
4 Adjust the sound level using the VOLUME
buttons on the remote control or the VOLUME
control on this main unit.
4
4
2
1
2
1
MAX
MIN
AUX
INPUT
LEVEL
3
1 Press the POWER button to turn the power on.
2 Load a recordable MD.
3 Press the AUX button.
4 Press the I REC button.
5 Start playback on the external unit.
6 Adjust the recording level using the AUX INPUT
LEVEL control.
● Adjust the recording level so that the “OVER” in-
dicator does not light at the maximum level.
L
R
OVER
OVER
7 Press the 0 6 button.
To stop recording:
Press the ■ button.
3
2
3
1
7
4
4
7
H
MAX
MIN
AUX
INPUT
LEVEL
6
H
1
(Continued)