Sharp MD-M1 - Specifications; Technical Specifications Overview

41
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and speci-
fication changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.
● General
Power source: AC 120 V, 60 Hz
Power
consumption: 60 W
Dimensions: Width; 6-5/16" (160 mm)
Height; 9-1/2" (240 mm)
Depth; 11-13/16" (300 mm)
Weight: 9.7 lbs. (4.4 kg)
● Amplifier section
Output power: FTC 16 watts per channel
minimum RMS into 4 ohms
from 80 Hz to 20 kHz with no
more than 10% total
harmonic distortion
Output terminals: Speaker; 4 ohms
Headphones; 16 - 50 ohms
(recommended 32 ohms)
Input terminals: AUX; 500 mV/47 k ohms
● MiniDisc recorder section
Type: MiniDisc recorder
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
Rotation speed: 400 - 900 rpm CLV, Approx.
Error correction: ACIRC (Advanced Cross In-
terleave Reed-Solomon
Code)
Quantization: 20-bit linear (A/D converter)
Coding: ATRAC (Adaptive TRansform
Acoustic Coding)
Sampling
frequency: 44.1 kHz
Recording
method: Magnetic modulation
overwrite method
Frequency
response: 20 - 20,000 Hz
D/A converter: 1-bit D/A converter
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range: 90 dB (1 kHz)
Audio channel: Stereo; 2 channels
Monaural; 1 channel
(playback only)
(long-time recording mode)
● Compact disc player section
Type: Top open type compact disc
player
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
Rotation speed: 200 - 500 rpm CLV, Approx.
Error correction: CIRC (Cross Interleave Reed-
Solomon Code)
Quantization: 16-bit linear
Frequency
response: 20 - 20,000 Hz
D/A converter: 1-bit D/A converter
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range: 90 dB (1 kHz)
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
● Tuner section
Frequency range: FM; 87.5 - 108.0 MHz
AM; 530 - 1,720 kHz
Sensitivity: FM; 2.5 µV (75 ohms unbal-
anced)
AM; 650 µV/m
● Speaker section
Type: Full range speaker system
Speakers: 4" (10cm) full-range speaker
Maximum input
power: 40 W
Rated input
power: 20 W
Impedance: 4 ohms
Dimensions: Width; 6-5/16" (160 mm)
Height; 9-1/2" (240 mm)
Depth; 7-1/4" (183 mm)
Weight; 4.0 lbs. (1.8 kg)/each