Sharp MD-MT20H

DIGITAL OUT
OPTICAL OUT
OPTICAL/
LINE IN
BEFORE RECORDING
9
■ Type of recording
Two types of recording are possible: “Digi-
tal recording” and “Analogue recording”.
There are different cables and connections
for each type of recording, depending on
the sockets on the equipment being con-
nected to the unit.
Optical digital cable (AD-M2DC, available separately)
(2) Digital recording
Connect the unit to equipment that has an
optical output socket using the optical digi-
tal cable included with this unit. Using an
optical signal to transfer the music to a
MiniDisc allows very high quality recording.
● Main equipment: CD player, MD player,
Digital radio, etc.
● Cable required: Optical digital cable
included with the unit or optional optical
digital cable AD-M2DC.
RL
OPTICAL/
LINE IN
AUDIO OUT
RIGHT LEFT
To the
OPTICAL/LINE
IN socket
Analogue cable included
with this unit
To the line output
sockets on a stereo
Playback side
Recording side
Recording side
To the OPTICAL/
LINE IN socket
Optical digital cable included with this unit
(1) Analogue recording
Connect the unit to equipment that has a
line output socket, using the analogue cable
included with this unit.
● Main equipment: CD player, MD player,
radio cassette player, etc.
● Cable required: Analogue cable in-
cluded with this unit.
To the optical out-
put socket (square
shaped socket) on
a stereo etc.
Playback side
To the optical out-
put socket (round
shaped socket) on
an MD player etc.
Playback side
* MD-MT20H FOR UK(01-21) 99.3.11, 2:29 PM10