EasyManua.ls Logo

Sharp MD-MT20H - Power Source

Sharp MD-MT20H
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER SOURCE
7
Rechargeable battery power
This unit can be used with the following power sources: a rechargeable battery, an AC
adaptor, commercially available alkaline batteries, and a separately available car adaptor
(AD-CA20X).
When the rechargeable battery is used for
the first time or when you want to use it af-
ter a long period of disuse, be sure to charge
it fully.
1 Open the battery cover.
2 Insert the rechargeable battery accord-
ing to the polarity marked on the bottom
of the unit.
3 Close the battery cover.
4 Plug the AC adaptor into the AC socket,
and then insert the plug on the AC adap-
tor lead into the DC IN 5V socket.
5 Press the VOLUME – button of the main
unit to begin charging.
” will appear, and the battery
will begin charging.
Battery charging will be complete in
4.0 hours. When the charging is com-
plete, “ ” will go out.
Notes:
After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
The battery will not be charged when-
ever the power to the main unit is turned
on.
Do not force open the battery cover too
wide.
1
2
4
3
5
AC 230-240V,
50/60 Hz
Insert securely,
all the way in.
To the DC IN 5V socket
* MD-MT20H FOR UK(01-21) 99.3.11, 2:29 PM8

Related product manuals