EasyManua.ls Logo

Sharp MD-MT290H - Using with the AC Adaptor

Sharp MD-MT290H
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
02/12/18 MD_MT290H_UK_2.fm
10
MD-MT290H
Power Source
-Using with the AC Adaptor-
About charging time
After about 3.5 hours have passed, " " will
go out. The battery is charged up to 90% if it is
completely discharged.
To charge the battery fully, continue charging for about 2
more hours. In this case, you do not need to press the
CHARGE button. Even if the CHARGE button is pressed,
" " will not appear.
Notes:
z Charge the battery within the range of 5°C - 35°C
(41°F - 95°F).
z The unit can be left in the charging state after it is
completed.
Caution:
Using with the AC Adaptor
Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 5V socket.
Caution:
z Insert the plugs firmly.
z When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
Notes:
z If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electric-
ity resumes.
z This unit can be used with the AC adaptor when the
rechargeable or an alkaline battery is in the unit.
z Carry the battery in the supplied case.
z Use the specified battery AD-N70BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.
z Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.
z Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.
z If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a dry
cloth.
z Do not disassemble the battery.
To the DC IN 5V socket
AC 230V,
50/60 Hz

Related product manuals