EasyManuals Logo

Sharp MD-MX30H User Manual

Sharp MD-MX30H
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
30
(Continued)
In the following cases, the EON stand-by mode will be cancelled.
When you press the ON/STAND-BY button to enter the stand-by mode.
When the unit is switched to another band in the EON stand-by mode.
When you change the FM station whilst in the EON stand-by mode.
When a preset call is made.
Notes:
During the same programme as the specified PTY (or TA) is being broadcast on the station you are receiving, the unit will
not switch to an ON (other network) station.
If there are more than two other network stations you want to listen to, compare the strength of each station's signal and
tune in the station with the strongest signal (EON-AF).
However, if the frequency of other network station has been stored in the preset channel memory, the unit will switch to that
preset channel.
If you want to cancel the reception of an ON (other network) station which was tuned in by the EON system and return to the
original station you were receiving, press the EON button.
After the unit returns to the original station, the stand-by mode will still be active. (The "TI" or "PTY" will remain lit.)
The unit does not switch from the ON station to another network station. It returns to the original station.
When the unit switches automatically to "other network" station, if there is any problem with this station or the station cannot
be received properly, "WEAK SIG" will appear and the unit will return to the original station.
Even if the unit switches from the station you are listening to directly to one "other network" station which is in the preset
memory, if the signal is very weak, the unit will search for another station of other network and find out the station with the
strongest signal and switch to it.
However, if the signals from all the other network stations are very weak, or if the tuning conditions are very bad (due to
electrical noise), the unit displays "WEAK SIG", and it will return to the original station you were receiving.
TP indicator
Not lit
Not lit
Lit
Lit
TA indicator
Not lit
Lit
Not lit
Lit
Meaning
This programme does not carry traffic announcements nor does it refer, via EON, to
a programme that does.
This programme carries EON information about another programme which gives
traffic information.
This programme carries traffic announcements but none are being broadcast at
present and may also carry EON information about other traffic announcements.
A traffic announcement is being broadcast on this programme at present.
About the TP and TA indicators
*23-30 00.1.13, 0:00 PM30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MD-MX30H and is the answer not in the manual?

Sharp MD-MX30H Specifications

General IconGeneral
BrandSharp
ModelMD-MX30H
CategorySpeaker System
LanguageEnglish

Related product manuals