40
(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD • Nothing is recorded. • Replace the disc with a recorded disc.
(
Neither music nor a disc name have been recorded on this MD
.)
Can't COPY •
You tried to record from a disc which you are not allowed to copy.
•
Replace it with another disc which you can copy from (regular CD)
.
Can't EDIT • A track cannot be edited. •
Change the stop position of the track and then try editing it.
Can't REC • Recording cannot be performed correctly due to vibration • Rerecord or replace it.
or shock in the unit.
DEFECT • Since this disc has scratches on it, the recording operation • Replace the disc with another recordable disc.
was skipped.
Din UNLOCK • Incorrect digital signals are input. • Connect correct digital signals.
• Use analog inputs.
DISC ERR* • The disc is damaged or there is no TOC on the disc. • Reload the disc or replace it.
DISC FULL • The disc is out of recording space. •
Replace the disc with another recordable disc.
EDIT OVER • There is no space left for recording CD. • Replace it with another recordable disc.
FOCUS ERROR • The proper focus cannot be obtained. • Reload the disc.
MD ERROR • The unit has determined that it is out of order • Ask the store where you purchased this unit, about repairs.
by performing a self-diagnosis.
MECHA ERR* • There is a mechanical problem and the disc is not working • Turn off the power, and press the EJECT button.
properly.
NAME FULL • The number of characters for the disc name or track name • Shorten the disc or track name.
exceeds 100.
NO DISC • A disc has not been loaded. • Load a disc.
• The disc data cannot be read. • Reload the disc.
NOT AUDIO • The data recorded on this disc is not audio data. • Select another track.
• Replace the disc.
PLAYBACK MD • You tried to record on a playback-only disc. • Replace it with a recordable disc.
PROTECT • The unit has determined that it is out of order by performing a •
Turn the power off and back on. If the problem is not resolved,
self-diagnosis.
ask the store where you purchased this unit, about repairs.
PROTECTED • The disc is write protected. • Move the write protection tab back to its original position.
TEMP OVER • The temperature is too high. • Turn off the power, and wait for a while.
TOC ERR* • The disc has a large amount of damage. • Replace the disc with another disc.
• TOC information cannot be read.
• The MD does not meet the specifications for MDs.
TOC FULL* • There is no space left for recording character information • Replace it with another recordable disc.
(track names, disc names, etc.).
TOC W ERROR • The unit has determined that it is abnormal • Ask the store where you purchased this unit, about repairs.
by performing a self-diagnosis.
U TOC ERR* • The TOC information on this disc does not meet the MD • Replace it with another disc.
specifications or it cannot be read. • Erase all the data, and try recording.
U TOC W ERROR • The TOC information could not be created properly due to • Turn off the power, and try to write the TOC again.
a mechanical shock or to scratches on the disc. (Remove any source of shock or vibration while writing.)
? DISC • The data contains an error. • Replace the disc with another disc.
0 00:00 • Music is not recorded. • Replace the disc with a recorded disc.
*: Number or symbol
*35-40 98.6.23, 10:11 AM40
To Next Page
Loading...
Need help?
General
