Sharp MX-2300 G - Page 23

MX-2300/2700 N/G MX-TRX1 3 – 1
MX2700N
5GTXKEG/CPWCN

[3] MX-TRX1
1. Unpacking
A. Removal of the exit tray unit
B. Check the packed items
1) Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1) Turn OFF the power switch on the operation panel.
2) Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
3) Remove the earth cord and disconnect the power plug of the
main unit from the power outlet.
B. Installation of the exit roller unit
1) Open the right door.
2) Remove the screw, and remove the connector cover.
No. Packed part names Quantity
1 Exit roller unit 1
2 Full detection actuator 1
1
12
OFF
OFF
OFF
1
2
: Dec. 15 2005
1