Sharp MX-2300 G

MX-2300/2700 N/G MX-RBX1, MX-FNX2 8 – 1
MX2700N
5GTXKEG/CPWCN

[8] MX-RBX1, MX-FNX2
1. Unpacking the MX-RBX1
A. Removal of the interface pass unit
B. Removal of the fixing tape
1) Remove the fixing tape.
C. Check the packed items
1) Check that all the items are included in the package.
2. Installing the MX-RBX1
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1) Turn OFF the power switch on the operation panel.
2) Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
No. Packed part names Quantity
1 Right cover plate 1
2 Interface left cabinet 1
3Reverse tray 1
4 Fixing screw A 6
5 Fixing screw B 1
6 Ornamental screw 1
7 Reverse detection actuator 1
8 Stopper 1
1
12 3
456
78
OFF
OFF
OFF
: Dec. 15 2005
1